Bateria Power 130-A Inflatable Fishing Boat – 4 m
A fishing-focused layout for your time on the water
The Bateria Power 130-A inflatable fishing boat combines a 4 m gray-and-black hull, EVA-covered aluminum decks and a cushioned seat with backrest. Its open interior and high-pressure drop-stitch floor create a practical starting point for a carefully planned fishing setup.
Key features
- Space for your fishing setup. The 4 m hull provides a 320 × 45 cm interior and a specified maximum load of 400 kg. The open layout gives you room to organize your setup around the central seat.
- EVA-covered deck surfaces. Two aluminum decks with textured EVA covering form the front and rear platforms. A high-pressure drop-stitch inflatable floor with an EVA anti-slip pad completes the interior.
- A dedicated seating position. A cushioned seat with a backrest provides a defined place to sit while fishing. The raised frame leaves the floor visible around the seat for a straightforward, uncluttered layout.
- Separate tube and floor chambers. The design uses three tube air chambers and one floor chamber. Specified construction includes 0.9 mm hull fabric and 1.4 mm bottom protection.
- Plan a compatible motor setup. The 130-A has a specified maximum motor rating of 10 HP and a maximum outboard weight of 30 kg. Check both limits, the 420 mm transom height and your motor's mounting requirements before fitting.
130-A specifications
| Model | 130-A (YK130A) |
|---|---|
| Overall dimensions | 400 × 125 cm / approx. 13.1 × 4.1 ft |
| Interior dimensions | 320 × 45 cm / approx. 126 × 17.7 in |
| Maximum load | 400 kg / approx. 882 lb |
| Hull and floor net weight | 30 kg / approx. 66 lb |
| Accessory net weight | 20 kg / approx. 44 lb (front deck, rear deck and seat) |
| Hull fabric thickness | 0.9 mm |
| Bottom protection thickness | 1.4 mm |
| Tube diameter | 20–40 cm, variable profile |
| Tube air chambers | 3 |
| Floor air chambers | 1 |
| Floor construction | High-pressure drop-stitch inflatable floor with EVA anti-slip pad |
| Deck configuration | 2 aluminum decks with EVA covering |
| Seat | 1 cushioned seat with backrest |
| Carry handles | 7 |
| Maximum motor rating | 10 HP |
| Maximum outboard weight | 30 kg / approx. 66 lb |
| Transom height | 420 mm / approx. 16.5 in |
| Tube pressure limit | Less than 5 psi |
| Floor pressure limit | Less than 15 psi |
Imperial measurements are approximate conversions of the supplied metric specifications. Hull-and-floor weight and accessory weight are listed separately.
Before fitting a motor
Choose a motor only after checking its power, total mounted weight, shaft length and mounting fit against the boat specifications. The maximum power and weight figures are limits, not a guarantee that every motor within those limits will fit. Include your intended equipment and supplies when planning the boat's load.
Inflation and setup
The specification lists tube pressure below 5 psi and floor pressure below 15 psi. These are upper limits, not recommended inflation targets. Follow the product's supplied instructions for working pressures, assembly and operation.